Products

Round doorbell made of black Bakelite with black pusher (low-voltage bell) with self-cleaning contact. Ø 5 cm, height 2 cm. Max. 24 V ~ (5mA - 1.5A / 24VA) / max. 24 V = (5mA - 1.0A / 12W).

Two-part case and lid made of Bakelite with a single lateral input; two lateral screw attachments facilitate wall mounting. Outlet with integrated child protection. With spring clips. Cable mounted on wall surface. Safety rating IP44 with sealed lid, rating IP20 when plug inserted. Each outlet comes with an additional rubber ring: if applied to an IP44 plug as an additional seal, the outlet attains safety rating IP44.
16 A, AC 250 V, IP44. Length 8.5 cm, width 9.7 cm, height above surface 7 cm. Weight 160 g.

Two-part case and locking bolt made of Bakelite with a single lateral input; two lateral screw attachments facilitate wall mounting. With spring clips. Cable mounted on wall surface. Additional types of rotary switches are available, e.g. crossbar and multi-series - simply contact us for details.
10 A, 10 AX, AC 250 V, IP44.
Length 8.5 cm, width 9.7 cm, height above surface 6.5 cm. Weight 190 g.

For vertical layouts with two outlets. Two-part case and lid made of Bakelite with non-adjacent in- and outputs. Two lateral screw attachments facilitate wall mounting. Outlet with integrated child protection. With spring clips. Cable mounted on wall surface. Safety rating IP44 with sealed lid, rating IP20 when plug inserted. Each outlet comes with an additional rubber ring: if applied to an IP44 plug as an additional seal, the outlet attains safety rating IP44.
16 A, AC 250 V, IP44. Length 11 cm, width 9.7 cm, height above surface 7 cm. Weight 190 g.

Portselanist laerosett messing kinnitusega, valge.

Tekstiilkaabel, 5 x 2,5mm, sobilik niisketesse ruumidesse.

Bakeliidist must 3-ne pikendusjuhe, pistik nurga all, kaabli pikkus 2,5 m, punane kaabel.

Kujundatud ja toodetud spetsiaalselt eksootilisetele puiduliikidele.

Värvitu või tooniv, siidmatt välistingimustes kasutamiseks, UV kaitse puudub.
Soovitame aiamööblile ja puidust terrassile.
Silub puidu pinda ning muudab selle vetthülgavaks ja mustust tõrjuvaks.
Kihtide arv: töötlemata puidul 2 kihti; renoveerimiseks kandke 1 kiht puhtale ja kuivale pinnale -lihvimine ei ole vajalik!
Saadaval 0,75 ja 2,50 liitristes purkides - professionaalidele saadaval ka 25 liitristes kanistrites.
1 liiter katab ühe kihina umbes 24 m2
Tootekaart terrassiõlid
Tiigipuu värvitu 007, UV-kaitse puudub

Traditsiooniline linaõlivärv sise- ja välistingimustesse. Ideaalne puitpindadele, sobib ka pleki ja metalli värvimiseks. Linaõlivärvi kantakse peale mitme õhukese kihina. Värvile on iseloomulik poolläikiv värvipind, mis aastatega matistub. Värvikulu: hööveldatud pind 10-15 m²/l, jämesaetud pind 8-12 m²/l.

Juugendlik kolme triibu motiiviga käepide kapile, patineeritud messing.

Ready to use fast drying acrylic resin dispersion solvent which reinforces and hardens any type of weakened wood from insects or anything that’s worn in time. Completely transparent it doesn't alter the natural tone, but penetrates deeply and seals the wood and recreating the original consistency, protecting it from further aggression. Internal and external use.
On natural unvarnished wood, filled with 1PK quick drying wood filler, Ecofiller, Two component filler sanded, free of dust, grease and wax. Check that any stains that have been applied (Multipurpose concentrated dye, Spirit stain) are perfectly dry.
Evenly apply an abundant amount using a brush. To improve the result, repeat the operation 2-3 times, waiting app. 30 minutes between each coat.
Leave to dry for 6-8 hours at a temperature of 20°C.
Sand lightly (220-240 grain), varnish or wax. If a shellac finish is needed, apply the Shellac french polish. For a wax finish use the Beeswax in paste form, for an oil finish use Hard finishing oil.

Impulsslüliti sisu, võimalikud erinevad sümbolid. Ilma raamita.

Jaamalatern töötlemata vasest kupliga, klaasist osa piimjas või läbipaistev.
Kõrgus: 25cm
Laius: 35cm
Kaugus seinast: 45 cm
Kaal: 3 kg
IP44

Lindner functional lights consist of a porcelain base with a ceramic inset. The insulating glass is screwed on to this base. There is a rubber gasket between the base and the glass. These simple, solid lights have been produced for over 40 years and can be safely used for many purposes.

Fits the base size S.
Width: 83 mm
Total height: 102 mm
Ø Thread diameter: 74,5 mm
Weight: 220 g.
Temperature: max. 125 °C

Temperature sensor
- NTC remote sensor
- Length: 4m (length can be changed)

- Function: Floor controller

- Sensor characteristics:
10 °C = 58,7 kΩ 25 °C = 30,0 kΩ
15 °C = 46,7 kΩ 30 °C = 24,3 kΩ
20 °C = 37,3 kΩ 35 °C = 19,7 kΩ

- Copper cover for the remote sensor
- for installations in the floor
- diameter: 21 mm / 8 mm
- length :113 mm

Välisvalgusti, IP44, valumalm, kuppel väljast must seest valge, kaugus seinast 37 cm.

Height: 23,0 cm

Width: 30,0 cm

From wall: 37,0 cm

Weight: 3,5 kg

Arm: Cast iron

Shade: Copper

Glass: Stable clear

Traditsiooniline linaõlivärv sise- ja välistingimustesse. Ideaalne puitpindadele, sobib ka pleki ja metalli värvimiseks. Linaõlivärvi kantakse peale mitme õhukese kihina. Värvile on iseloomulik poolläikiv värvipind, mis aastatega matistub. Värvikulu: hööveldatud pind 10-15 m²/l, jämesaetud pind 8-12 m²/l.

Diagonal white porcelain base.
Open terminal compartment and cable entrance. IEC protection class II.
With out glass IP code 20, with rubber gasket and Lisilux glass size S IP code 54.
Borehole spacing: 73 mm
83 mm Ø, outreach: 60 mm
Weight: 350g
Bulb holder E27 (max. 60 W)

Lindner functional lights consist of a porcelain base with a ceramic inset. The insulating glass is screwed on to this base. There is a rubber gasket between the base and the glass. These simple, solid lights have been produced for over 40 years and can be safely used for many purposes.
Socket E27
open terminal compartment, white porcelain base and one cable entrance in IEC protection class II and with IP code 54
breadth: 120 mm
lamp glass: 83 mm Ø
projection: 136 mm
Gewicht 600 g

Diagonal white porcelain base
Open terminal compartment and cable entrance. IEC protection class II.
Without glass the luminaire has IP20.
With the included rubber gasket and the combinable Lisilux glasses, the luminaire has IP54.
Borehole spacing: 85 mm
95 mm Ø, outreach: 60 mm
Weight: 470 g
Bulb holder E27 (max. 75 W)

Fits the base size S.
Width: 125 mm
Total height: 130 mm
Ø Thread diameter: 74,5 mm
Weight: 360 g.
Combinable with LISILUX-Fitting

USB pesa sisu, raam lisada eraldi.